Izumi Motorcycle Chain - Premium Superior Quality Chain - Made in Japan -

Each Izumi Chain includes a type master link.
A Rivet type link is also included with Chains

  • ES530HT (High Tensile Nickel Plated Chain)
  • ES530HSDC (Heavy Super Duty O-Ring Chain)
  • ES520SDC (Super Duty Chain)
  • ES520MCR (Gold MX & Road Heavy Duty Chain)
  • Note: For Maximum Strength & Durability use rivet type Joiner Links

IZUMI Chain Rivet Links are Hollow pin end type and should be riveted with our special tool XS# 35-0006
Mikes XS offers this Riveting tool at below cost to our chain customers.
Note: Rivet Tool for other brands of Japanese high strength chain often cost well in excess of $100.00

CHAIN FACTS
North American model XS/TX650's (1974-84) with Stock 17T/34T sprockets use a 104 Link Chain
COUNT Your Sprocket Teeth and Chain Links!

Mikes XS is not responsible for customer mismatched chain lengths and chains are Not returnable.
New chains will usually be very tight when newly installed but will loosen in a few miles when the high pressure factory injected roller grease runs in. Install chains with Axel all the way forward, chain adjusters fully loosened and bike off center stand. Use of chain puller (XS# 35-0130) may be required to get the master link in place.
Worn (Stretched or Hooked) Sprocket Teeth will cause fitting difficulties.
18Tooth front sprockets will fit if the shift shaft guard is removed.
Keep your chain adjusted! 18Tooth front sprockets move the chain closer to the Clutch Pushrod.

XS650's use 530 (#50) type chain as stock size, Mikes XS now offers lighter weight 520 types.
520 Chains Must be used with 520 Sprockets: See our Sprocket Listing
520 Chains & Sprockets are lighter and decrease unsprung weight loading.
520 & 530 IZUMI Chains (same grades) have the same dimensions (except width) and the same Tensile Strength.
530 Sprockets usually last longer than 520 Sprockets due to the wider load bearing area.

Always Confirm Sprocket size and Matching Chain Lengths (See info listed below)
Before Ordering!

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 98 Link.
This is the stock length on 1970-73 650's with 17T/34T standard sprockets.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0037
$64.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 100 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-6100
$69.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 102 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0038
$69.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 104 Link.
This is the stock length on 1974-84 650's with 17T/34T standard sprockets.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0039
$74.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 106 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0040
$74.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - Heavy Duty 530

Product Photo
IZUMI Rear Drive Chain - ES530H x 110 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0041
$77.95 CAD Ea
Add to Cart

IZUMI Drive Chain ES530Hx130

Product Photo
IZUMI Rear Drive Chain ES530H x 130 Link

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0042
$84.95 CAD Ea
Add to Cart

IZUMI Clip Link

Product Photo
Clip Link - Replacement for ES530H IZUMI Chains.
Part #56-0043
$4.95 CAD Ea
Add to Cart
IZUMI DRIVE CHAIN
PREMIUM HIGH TENSILE (HT) MOTORCYCLE CHAIN
WITH NICKEL PLATED SIDEPLATES
- Japanese Made Superior Quality -

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 100 Link.- Japanese made - Premium Quality
Part #56-0044
$84.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 102 Link.- Japanese made - Premium Quality

High Tensile Motorcycle Chain with Nickel Plated Sideplates.
Part #56-0045
$84.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 104 Link.- Japanese made - Premium Quality
This is the stock length on 74-84 650's with 17T/34T standard sprockets.

High Tensile Motorcycle Chain with Nickel Plated Sideplates.
Part #56-0046
$84.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 106 Link.- Japanese made - Premium Quality

High Tensile Motorcycle Chain with Nickel Plated Sideplates.
Part #56-0047
$89.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 110 Link.- Japanese made - Premium Quality

High Tensile Motorcycle Chain with Nickel Plated Sideplates.
Part #56-0051
$89.95 CAD Ea
Add to Cart

IZUMI Rear Drive Chain - High Tensile 530

Product Photo
IZUMI Rear Drive Chain - 530HT x 130 Link -Japanese made - Premium Quality
Long Length for Chopper Projects - Cut to fit yours!

High Tensile Motorcycle Chain with Nickel Plated Sideplates.
Part #56-6130
$89.95 CAD Ea
Add to Cart

IZUMI Clip Link

Product Photo
Clip Link - Replacement for 530HT IZUMI Chains.
Press Fit Type sideplate for high strength.
Part #56-0053
$5.95 CAD Ea
Add to Cart

Rivet Type Joiner Link

Product Photo
Rivet Type Joiner Link for 530HT Chains. New hollow end Rivet Type.
Use this link for Maximum Chain Strength.

Note: Special Riveting Tool Required.
Part #56-0235
$7.50 CAD Ea
Add to Cart
IZUMI Motorcycle Chain
1pc. of clip type Master Link is included with each Izumi Chain
Average Tensile Strength of IZUMI ES530H (#50) chain is7,480Lbs.
Average Tensile Strength of IZUMI 530HT (#50) chain is 8,360Lbs.
For maximum strength & durability use Rivet type joiner Links.

Note: XS650's & TX650A 1974 - 84 with stock 17T/34T sprockets use a 104 link drive chain.
XS1/XS1B/XS2/TX650 1970-73 models use a 98 link chain.

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 98 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan
Part #56-0021
$129.95 CAD Ea
Add to Cart

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 100 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan
Part #56-0022
$139.95 CAD Ea
Add to Cart

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 102 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan
Part #56-0023
$149.95 CAD Ea
Add to Cart

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 104 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan

This is the stock chain Length for 74-84 650's with 17T/34T standard Sprockets.
Part #56-0024
$169.95 CAD Ea
Add to Cart

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 106 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan
Part #56-0025
$169.95 CAD Ea
Add to Cart

IZUMI Heavy Super Duty 530 O-Ring Chain

Product Photo
IZUMI ES530HSDC x 110 (Heavy Super Duty O-Ring Chain)
Superior Quality - Made in Japan
Part #56-0026
$169.95 CAD Ea
Add to Cart

ES530HSDC Rivet Joiner Link (hollow end)

Product Photo
ES530HSDC Rivet Joiner Link (hollow end)
Part #56-0440
$8.50 CAD Ea
Add to Cart

ES530HSDC Clip Link

Product Photo
ES530HSDC Clip Link
Part #56-0441
$5.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Heavy Duty 520

Product Photo
IZUMI Drive Chain - ES520H x 100 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0092
$57.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Heavy Duty 520

Product Photo
IZUMI Drive Chain - ES520H x 102 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0093
$57.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Heavy Duty 520

Product Photo
IZUMI Drive Chain - ES520H x 104 Link.
This is the stock length on 1974-84 650's with 17T/34T standard sprockets.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0094
$64.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Heavy Duty 520

Product Photo
IZUMI Drive Chain - ES520H x 110 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0095
$69.95 CAD Ea
Add to Cart

IZUMI Drive Chain ES520Hx130

Product Photo
IZUMI Drive Chain ES520H x 130 Link.

Heavy Duty Motorcycle Chain - Japanese Made Superior Quality
Part #56-0099
$74.95 CAD Ea
Add to Cart

IZUMI Clip Link

Product Photo
Clip Link - Replacement for ES520H IZUMI Chains.
Part #56-0097
$4.50 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 98 Link.

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0218
$114.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 100 Link.

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0219
$114.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 102 Link.

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0220
$114.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 104 Link.
This is the stock chain Length for 74-84 650's with 17T/34T standard Sprockets

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0221
$114.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 110 Link.

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0222
$124.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Gold 520 Heavy Duty

Product Photo
ES520MCR x 130 Link.

Gold Anodized Heavy Duty MX & Road Chain (Non O-Ring)

Japanese Made Superior Quality
Part #56-0228
$169.95 CAD Ea
Add to Cart

Clip Type Joiner Link

Product Photo
ES520MCR Clip Type Joiner Link
Part #56-0225
$5.95 CAD Ea
Add to Cart

Rivet Joiner Link

Product Photo
ES520MCR Rivet Joiner Link (Hollow End)
Part #56-0226
$7.50 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 98 Link.
This is the stock length on 1970-73 650's with 17T/34T standard sprockets.

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0013
$94.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 100 Link.

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0014
$94.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 102 Link.

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0015
$96.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 104
This is the stock chain Length for 74-84 650's with 17T/34T standard Sprockets

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0016
$119.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 106 Link.

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0017
$119.95 CAD Ea
Add to Cart

IZUMI Drive Chain - Super Duty 520 O - Ring

Product Photo
ES520SDC x 110 Link.

Super Duty 520 O-Ring Chain, Japanese Made Superior Quality.
Part #56-0018
$119.95 CAD Ea
Add to Cart

Clip Link Joiner Link

Product Photo
ES520SDC Clip Type Joiner Link
Part #56-0020
$4.95 CAD Ea
Add to Cart

Rivet Joiner Link

Product Photo
ES520SDC Rivet Joiner Link (Hollow End)
Part #56-0227
$7.50 CAD Ea
Add to Cart

Drive Chain Riveter Tool

Product Photo
Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with
hollow pin ends as on our IZUMI 530HT Chain (Rivet link #56-0235) and many DID
brand chains.

Extra Rivet Pins Available Below
Part #35-0006
$49.95 CAD Ea
Add to Cart

Replacement Rivet Pin

Product Photo
Drive Chain Rivet Tool Replacement Rivet Pin.

Fits: Drive Chain Riveter Tool #35-0006
Part #35-0007
$8.50 CAD Ea
Add to Cart

Chain Puller Tool

Product Photo
Chain Puller Tool, Pulls new rear drive chain ends together so that
the joiner link can be slipped in place. Ideal for new chains that
are difficult to get together for the first time.
Part #35-0130
$18.95 CAD Ea
Add to Cart

Chain Press Tool

Product Photo
Chain Press Tool. Used to press on sideplates (rivet or clip type) onto rear
drive chains. Most late type High strength drive chains now use a press on
sideplate on the connecting link (including IZUMI 530 HT).
Part #35-0081
$7.50 CAD Ea
Add to Cart

Drive Chain Breaker Tool

Product Photo
Drive Chain Breaker Tool, Breaks 520/530 and 630 Pitch Chain.
Part #35-0083
$29.95 CAD Ea
Add to Cart

Chain Adjuster Set

Product Photo
Chain Adjuster Set - Fits: 1974-84 650's
Part #28-1065
$27.95 CAD Set
Add to Cart

Chain Guard - Black

Product Photo
Chain Guard - Black - Replica of Original "Special" model chain guard.

Fits: 1974-84 650 "Special" or Standard models.

Note: Remove the Rear Wheel to install Chain Guard
Part #56-0002
$89.95 CAD Ea
Add to Cart

Chain Guard - Chrome

Product Photo
Chain Guard - Chrome - Replica of Original "Special" model chain guard.

Fits: 1974-84 650 "Special" or Standard models.

Note: Remove the Rear Wheel to install Chain Guard
Part #56-0001
$89.95 CAD Ea
Add to Cart
For Matching Drive Sprockets See Section - CHASSIS/BRAKES - Sprockets