Front Fork Damper Valve Set

Product Photo
XS Performance
Front Fork Damper Valves (Pr/2)
Tuneable Valves are installed on top of the front fork dampening rods and below
the fork springs. The adjustable Damper Valve make rod style fork dampers
perform like modern cartridge style forks.

Fits: 35mm. forks on 1978-84 XS650's.

The Best suspension upgrade modification for the XS650

Note: Damper rod drilling required.

Photo install instructions included.
Part #27-1086
$69.95 CAD Pr
Add to Cart

Damper retaining bolts.

Product Photo
Damper Retaining Bolt (Pk/2). Fits into lower fork leg to inner fork damper.
Special size allen socket head.

Fits: XS650's 1977-84
Part #18-5021
$6.50 CAD Pr
Add to Cart

Damper Bolt Sealing Washers

Product Photo
Damper Bolt Sealing Washers - Copper (Pr.) - Fits under allen socket head
damper retaining bolts (Lower fork leg to inner dampers).
Part #18-5020
$2.95 CAD Pr
Add to Cart

Damper Bolt Driver

Product Photo
Damper Bolt Driver - Deep type damper bolt driver used to air
impact recessed damper bolts from lower fork legs.
Part #35-5022
$9.95 CAD Ea
Add to Cart

Fork Tube Set

Product Photo
Fork Tube Set (2) - Replace those Worn/Damaged Fork tubes with our
New Tubes & restore your front end to proper function & appearance.
OEM Ref.# 306-23124-60-00 34mm OD.

Fits: XS2 (1972) and TX650 (1973)
Part #27-2002
$179.95 CAD Set
Add to Cart

Fork Tube Set

Product Photo
Fork Tube Set (2) - Replace those Worn/Damaged Fork tubes with our
New Tubes & restore your front end to proper function & appearance.
OEM Ref.# 533/371-23124 34mm OD.

Fits: TX650A (1974) and XS650B/C (1975-76)
Part #27-3000
$179.95 CAD Set
Add to Cart

Fork Tube Set

Product Photo
Fork Tubes Set/2 - Replace those worn or damaged stock fork tubes with our new
fork tubes and restore your front end to proper appearance and function.
Replaces OEM #'s: 2F0-23110-00, 1T3-23124-50, 1G3-23124-50.

Standard Length 35mm. Fork Tubes fit All 1977-84 650's.
Part #27-3002
$179.95 CAD Set
Add to Cart

Fork Tube Set + 2"

Product Photo
Extended Fork Tube Set/2 (+ 2" over stock length).

35mm. OD Fork Tubes to fit All 1977-84 650's.
Part #27-3003
$179.95 CAD Set
Add to Cart

Fork Tube Set + 4"

Product Photo
Extended Fork Tube Set/2 (+ 4" over stock length).

35mm. OD Fork Tubes to fit All 1977-84 650's .
Part #27-3004
$179.95 CAD Set
Add to Cart

Fork Tube Set + 6"

Product Photo
Extended Fork Tube Set/2 (+ 6" over stock length).

35mm OD Fork Tubes to fit All 1977-84 650's.
Part #27-3006
$189.95 CAD Set
Add to Cart

Fork Tube Cap Set

Product Photo
Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps.
OEM Ref# 256-23111-60-00

Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72)

Caution! Fine thread, use care when installing.
Part #27-4000
$47.95 CAD Set/2
Add to Cart

Fork Tube Cap Set

Product Photo
Fork Tube Caps - Set/2 - Stock Aluminum OEM type.
Replaces OEM # 341-23111-50/51

Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76)

Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install.
Caution! Fine thread, use care when installing.
Part #27-4002
$47.95 CAD Set/2
Add to Cart

Fork Cap O-Rings

Product Photo
Fork Tube Cap O-Rings (Pk/2) for 34mm Forks

Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76)
Part #27-5000
$3.95 CAD Pk./2
Add to Cart

Fork Tube Rubber Cap

Product Photo
Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2 -

Original type as used on 1974-76 TX/XS650's
Part #27-1092
$7.95 CAD Pk2
Add to Cart

Fork Tube Cap Set

Product Photo
Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster.
OEM Ref.# 1T3-23111-50-00

Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork
tubes Recommended type for 77-84 models using our 27-1088 progressive type fork
springs and/or our fork damper valves #27-1086.

Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install.
Caution! Fine thread, use care when installing.
Part #27-4003
$47.95 CAD Set/2
Add to Cart

Fork Tube Cap Set

Product Photo
Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster.

Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome
adjustable US model Cap used on 1978-84 650's

Note: Adjustable caps were never used on 650's outside of North America.
22mm Hex top Caution! Fine thread, use care when installing.
Part #27-4004
$49.95 CAD Set/2
Add to Cart

Fork Cap O-Rings

Product Photo
Fork Tube Cap O-Ring (Pk/2) for 35mm Forks

Fits: All XS650's 1977-84
Part #27-5001
$3.95 CAD Pk/2
Add to Cart

Fork Tube Rubber Cap

Product Photo
Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2 -

Original type as used on 1977-84 XS650's
Part #27-1091
$9.95 CAD Pk./2
Add to Cart

Fork Tube Cap Tool

Product Photo
17mm Hex (Allen) Bit Tool to Remove Fork Tube Top Caps. A perfect fit to
remove those soft alloy fork tube caps without damage.

Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without
preload adjuster).
Part #35-1081
$6.95 CAD Ea
Add to Cart

22mm Fork Cap Wrench

Product Photo
22mm 12 Point Fork Cap Wrench. Removes Alloy Fork Tube Caps.

Fits: TX650 (1973), XS650 (1978-84)
Part #35-1076
$6.95 CAD Ea
Add to Cart

Fork Cap Box Wrench

Product Photo
32mm 6 Point Box Wrench - Chrome Plated Steel. Also has 39mm Size.
Part #35-1080
$13.95 CAD Ea
Add to Cart

Fork Oil Level Gauge

Product Photo
Fork Oil Level Gauge for Adjusting the Oil Level on all XS650 Forks.
Adjustable ring measures oil levels from 0-300mm in 50mm increments.
60ml capacity syringe adjusts fluid levels.
Part #35-1084
$21.95 CAD Ea
Add to Cart

Billet Aluminum Upper Triple Tree Clamp

Product Photo
Custom Billet Aluminum Machined Upper Triple Tree Clamp

This is a beautifully designed billet aluminum upper triple machined for the Yamaha XS650's which use the 35mm fork. Who does not want to look down from their perch, and see a beautifully crafted piece of aluminum, that also has a function? These are a simple, yet great looking and functional addition for your XS650. Add clip-ons (not included) and you have an instant head turner with an aggressive stance.

Featuring stainless steel hardware for pinch bolts, and a satin finish. Also, underneath there are 2 tapped holes to add aftermarket gauges, or your factory bracket and clocks. Since these are flat across, when compared to the stock units, they WILL LOWER YOUR FRONT END about an inch. It will sharpen up your steering, but you will also lose a little ground clearance at the frame center (Less than a half inch).

Fits XS650 Models with 35mm Fork tubes (measure before you order) such as: XS650 (1977-83)

Very High quality, machined in North America.

Clip on bars not included and your stock bars will NOT mount to this piece.
Part #28-6916
$177.95 CAD Ea
Add to Cart

Graduated Cylinder

Product Photo
500cc (1/2 Liter) Plastic Graduated Cylinder for Accurate Measuring of Fluids.
Part #35-2211
$13.95 CAD Ea
Add to Cart

Graduated Cylinder

Product Photo
250cc (1/4 Liter) Plastic Graduated Cylinder for Accurate Measuring of Fluids.
Part #35-2210
$11.95 CAD Ea
Add to Cart

Front Fork Spring Set

Product Photo
XS Performance
Performance Progressive wound Front Fork Spring Set.
Springs Improve handling while retaining OEM geometry. Stops front end
droop and diving during braking while improving cornering stability.
Progressive design combats bottoming in harsh conditions by increasing
resistance as spring compresses. 23mm Dia. x 495mm long.

Fits: 34mm stock forks on TX650A (1974) and XS650B/C (1975-76)
Part #27-1087
$74.95 CAD Set/2
Add to Cart

Front Fork Spring Set

Product Photo
XS Performance
Performance Progressive wound Front Fork Spring Set.
Springs improve handling while retaining OEM geometry. Stops front end
droop and diving during braking while improving cornering stability.
Progressive design combats bottoming in harsh conditions by increasing
resistance as spring compresses. 24mm Dia. x 484mm long.

Fits: 35mm stock forks on XS650 (1977-84)
Part #27-1088
$74.95 CAD Set
Add to Cart

Fork Seal Set

Product Photo
Fork Seal Set - 34 x 46 x 10.5 - Made In Japan by OEM Supplier.

Fits: 1970-76 TX/XS 650's (34mm fork Tubes)
Part #27-1016
$15.95 CAD Set
Add to Cart

Fork Seal Dust Covers

Product Photo
Fork Seal Dust Covers (Pk/2)

Fits: 1971-76 XS/TX650's (34mm fork tubes)
Part #27-1066
$26.95 CAD Pk./2
Add to Cart

Fork Seal Set

Product Photo
Fork Seal Set - 35 x 48 x 10.5/11 - Made In Japan by OEM supplier.

Fits: 1977-84 XS 650's (35mm Fork Tubes).
Part #27-1007
$15.95 CAD Set
Add to Cart

Fork Seal Dust Covers

Product Photo
Fork Seal Dust Covers (Pk/2)

Fits: 1977-84 XS650D-K (35mm fork tubes)
Part #27-1065
$26.95 CAD Pk./2
Add to Cart

Fork Seal Retaining Clip

Product Photo
Fork Seal Spring Clips (Pk/2) - These clips fit into the groove above the fork
seals in the lower fork legs.

Fits: All 1977-84 650's
Part #27-1063
$5.95 CAD Pk./2
Add to Cart

Fork Seal Washers

Product Photo
Fork Seal Washers Pk/2. Fit on top of Fork Seals and below the spring
clips in the lower fork legs.

Fits: All 1977-84 650's
Part #27-1062
$6.95 CAD Pk./2
Add to Cart

Fork Gaitor Set

Product Photo
Fork Gaitors (Set/2) for 1970 XS1 650 but adaptable to All 1971-84 models.

(Remove stock dust covers). Give your 650 that "British" look. Provides great
fork protection. 1970 models had a lip piece on the lower triple tree on which
to clamp the boot, for later models simply insert a piece of split rubber rad
hose inside and clamp the upper part of the boot to the fork tube. We suggest
a breathing hole be punched on a lower pleat also (face to rear) to allow
venting of air.
Part #27-1089
$32.95 CAD Set/2
Add to Cart

Fork Brace

Product Photo
XS Performance
Fork Brace - Stiffens front end, improves handling. Precision Steel
construction, Chrome plated finish.

Fits: 1977-84 650's (over fender)
Part #27-1070
$79.95 CAD Ea
Add to Cart