XS650 Direct

Bronze Swing arm Bushings (Set/2) - Replace your plastic factory swing arm
bushings!, Improve your bikes handling. A first Must Do for All XS650's
Set Fits: All 1970-84 650's

Swingarm Grease Seal Set - Holds grease into bushings & shaft area of swing
arm. Helps seal out water & dirt. If your bike has originals they should be re-
placed! ( 20+ years). Made in Japan by original supplier. Fits: All 650's 70-84

Swing arm bolt Grease Fitting - Replace original grease fittings with ones that
fit to common American size grease guns. Fittings fit to ends of swing arm
shaft (bolt). 2 required per bike. Fits: All 650's 1970-84

Bushing (swing arm Bolt tube) OEM Ref.# 341-22184-00

Note: Tube is a slip fit through bronze bushings.
Replace if original is galled or will not fit through
new bronze bushings.

Fits: All 650's 1970-84

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original).
Fits: XS650's 1974-84. Check your original for cracks at the threads.

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original).
Fits:XS1/XS1b/XS2/TX650 (1970-73). Check your original for cracks at the threads.

Swing arm Needle Bearing Conversion Kit - Kit includes - Needle Bearings &
Hardened shaft. Fits: XS/TX650's 1974-84 - Made in Japan

Replacement shaft Needle Bearing for #28-1011 conversion kit

Replacement Shaft End Bearing (Needle thrust washer) for kit #28-1011

Steering Head Bolt with domed head and matching chrome radiused Washer.
Fits: All 650's with a steering head post Bolt (not models with a damper).
Improved appearance over stock style.

Steering Head Bearing Kit - Kit replaces factory loose ball bearings & races.
Tapered Roller bearings have 10 times the contact area and less flex. Drop in
replacement for factory original type. Japanese made Superior Quality.
Fits: 1970-84 XS/TX 650's

Ring Wrench to Tighten Steering Head Cogged Nuts
Also fits preload adjuster on some stock Yamaha Shocks

Steering Head Locknut. Fits: 74-84 XS650's
Replaces OEM # 90179-25033

Hydraulic Steering Damper - 7 position adjustable in 20Lb. force increments.
Quality Made in Japan. Ideal for sidecar or racing use. Frame bracket must be
fabricated to adapt to your application.

Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.
Fits: 35mm. Fork tubes on Yamaha XS650's (1977-84). Made in Japan

Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.
Fits: 34mm. Fork tubes on Yamaha XS/TX650's (1971-76). Made in Japan