- Brake Switches
- Handlebar Switches
- Signal Lamps & Reflectors
- After Market/Custom Tail Lights
- Original Type Tail Lights & Lenses
- Headlamps, Headlamp Brackets, Headlamp Parts
- Ignition: Systems, Coils, Plugs, Switches, Hardware
- Pamco Ignitions and Parts
- Starter System related parts
- Charging System: 1980-84 650 Rotors, Stators, Regulators, Brushes
- Charging System: 1970-79 Rotors, Stators, Regulators, Brushes
- Horns, Miscellaneous electrical parts
- Battery Cables, Batteries, Fuses, Fuse Boxes
- Wire Terminals & Couplers, Wire Harnesses
Chrome Horn
Chrome Horn - Use this horn if yours is under the frame neck.- 3 7/8" Diameter
Black Horn
Black Horn - Use this horn if yours is under the fuel tank - 3.5" Diameter.
Power Relay
Power Relay for Horns or other power relay uses such as
Pamcopete kill switch power relay. 12 Volt 30 AMP 4 pin type.
Note: This relay is Not required if using standard
horns or lighting loads.
Pamcopete kill switch power relay. 12 Volt 30 AMP 4 pin type.
Note: This relay is Not required if using standard
horns or lighting loads.
Horn Button with Spring
Horn Button with Spring - Fits: XS/TX650 switches 1974-84.
Handlebar Switch Housing Screws - Brake Side
Chrome Switch housing Screws (Pk./2)
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
Handlebar Switch Housing Screws - Clutch Side
Black Switch housing Screws (Pk./2)
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2058
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2058
Handlebar Switch Housing Screws - Brake Side
Black Switch housing Screws (Pk./2)
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2059 & #24-2060
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2059 & #24-2060
Clutch Safe-T Switch
Clutch Safe-T Switch - Fits: XS650s 1980-84 that have this switch mounted on
the clutch lever bracket (clutch must be pulled in to start bike).
the clutch lever bracket (clutch must be pulled in to start bike).
Neutral switch rubber Cap
Neutral switch rubber Cap - Fits: All 650's (neutral wire runs from alternator loom).
Bulb for original stock Tach & Speedos
Bulb for original stock Tach & Speedos - 12Volt 3 Watt
Fits: Most 1970-80 650's.
Fits: Most 1970-80 650's.
Bulb for original stock Tach & Speedos
Bulb for original stock Tach & Speedos - 12Volt 3 Watt Push in type.
Fits: Most 1981-84 XS650's.
Fits: Most 1981-84 XS650's.