XS650 Direct

Gas Cap XS1/XS2 with Latch Lever

Rubber Seal for XS1 Cap Seal

Steel Fuel Tank - 3.9US gallon (15 litre) " Standard" type
Includes New Manual type #20-0019 Petcocks (Two) and chrome gas cap.
Tank is painted Black with Gold stripes (No Yamaha Name) and is patterned
after the original 1977D model. Fits: Any 1974-84 XS/TX650.

Steel Fuel Tank - 3.9US gallon (15 litre) " Standard" type
Includes New Manual type #20-0019 Petcocks (Two) and chrome gas cap.
Tank is painted Black (No Yamaha Name) and is patterned after the original
1977D model standard tank. Fits: Any 1974-84 XS/TX650.

Gas Cap with keys - Fits: 1976-79 XS650 "Standard" models and our 64-7700 and
64-7702 Fuel Tanks.

Note: Caps from "Standards" and "Specials" do not interchange.

Fits: 1978-84 650 "Specials"

Note: Caps from "Standards" and "Specials" do not interchange.

Gas cap Rubber Seal - Fits: All 1976-84 XS650 gas caps.

Gas cap Rubber Seal - Fits: All 1974-75 XS/TX 650 gas caps.
Oem Ref.# 341-24612-01

Gas Tank Mount Rubber - Front - Fits: All 650's 1970-84

Gas Tank Mount Rubber - Rear - Fits: All 650's 1970-84

Petcock - Left Hand.- Original Non-Vacuum Manual type - (3 screw rear cover)
Includes: Tap to Tank O-Ring. Replaces All original Left non-Vacuum types
used on 1970-77 650's.

Petcock - Right Hand - Original Non-Vacuum Manual type - (3 screw rear cover)
Includes: Tap to Tank O-Ring. Replaces All original Right non-Vacuum types
used on 1970-77 650's

Tap to tank Mount Screws(2) and Sealing Washers(2) - Fits: All 650's 1970-84.

Sealing Washers for Tap to Tank Mount Screws. Fits: Under mount screws on
1970-84 650's

Petcock Mount O-Ring - (Tap to Tank O-Ring) - Fits: Petcocks on 70-77 650's

Petcock Rebuild kit - Fits: TX650/A 1973-74, XS650B/C/D 1975-77
These petcocks have a 3 Screw Rear cover plate. Kit contains: 1pc. Valve
Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer,
1pc. Drain screw Gasket, 1 pc. Rear cover Gasket ( 3 Screw type ).

Petcock Rebuild kit - Fits: XS1/XS1B/XS2 1970-72 - These petcocks have a
2 Screw Rear cover plate. Kit contains: 1pc. Valve Rubber, 1pc. Wave Washer,
1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket,
1 pc.Rear cover Gasket (2 Screw).

Petcock Rear Cover Gasket - (3 Hole) Fits: TX/XS650's - 1973-77 + our #20-0019
petcocks. OEM Ref.# 447-24522-00

Petcock Rear Cover Gasket - (2 Hole) Fits: TX/XS650's (usually on 1970-72).
OEM Ref.# 256-24522-00

Petcocks - Non Vacuum type to replace 1978-84 vacuum type petcocks.

All 1978-84 North American market 650's have original petcocks operated by
Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and
1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are
all getting to the point of being non-repairable. Our petcock is the Early type 650
manual petcock with a wider flange cast on it so it will fit in place of the vacuum
types. Our Petcock fits to right or left and each comes with the tap to tank
O-Ring seal and assorted outlet fittings ( petcock has 2 outlet ports).
Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug.
There is an "ON", "OFF" and "Reserve" position.

O-Ring - Replacement Tap To Tank O-Ring for #20-0019 manual petcock

Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00

Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum
petcocks are replaced with manual type petcocks. Order quantity needed.

Fits: All Mikes XS Carb Holders and Carb Holders for Keihin Flatslide
PWK 32mm XS Performance Carb Set for XS650.

Note: Each carb holder requires 1 Blind Plug.

Petcock fuel pipe Filter Set(2) - Fits: Over petcock fuel pipes up inside gas tank.
Filter Set - Replacements for #20-0019 petcocks and will also fit 1970-77 stock
petcocks.

Petcock 90 degree outlet Fitting - Replacement fitting - Fits: XS650 Petcocks -
#20-0019/0050/0051 Use as Required (Not original on 20-0050/51).

Petcock Filter with attached filter screen.
Fits: Original Yamaha manual Petcocks Only.

Fuel Line T - Fits: 1/4" - 5/16" ID fuel line.
Ideal for linking output from two fuel petcocks into one.

Wire Spring type Hose Clamp. 0.35" (9mm.) inside Diameter size (unexpanded)
in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10
black rubber fuel line.

Black Rubber Fuel Line - (original thin wall type) 1/4" ID (6mm.) - 1pc. x 11.5"

Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x
11.5"

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).

Wire Spring type Hose Clamp. 3/16" (4mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for small carb vent hose.

Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching small fuel or vent hose.

Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.

Clear square inline Fuel Filter.

Brass Carb Fuel Line T-Piece & rubber seals(2) -
( Fuel supply T pipe that fits between carbs). Replaces plastic coated pot metal
stock fuel T that fits between stock Mikuni BS 34mm. CV carbs used on North
American Market 1980-84 XS650's.
Fits: 80-84 34mm. CV carbs.

Note: Carbs will have to be detached from each other to install and we suggest you
replace the link bar screws that join the 2 carbs together as originals are usually
difficult to remove without

Note: Fuel T 48-0884 is a pressed together assembly
and must be handled/installed with care.

Replacement Rubber T Seals for Brass fuel Line

Stainless Steel carb link bar Screws - Set of 4 with socket (Allen) heads.

Link bar screws hold carbs together (on the carb support brackets) and often
need replacing when changing the fuel line T on stock 80-84 BS34 CV carbs.