Carb Holder Set

Product Photo
Carb Holder Set Fits: Stock Mikuni BS38 CV Carburetors on TX650A 1974 &
XS650B/C/D (1975-77) & XS650 80

Kit Includes 2 intake manifold gaskets, 1pc.(RH) #447-13565 & 1pc.(LH)
#447-13555

Note: These fit to 1978-79 models carbs but lack the Air barbs that
operate the stock vacuum type petcocks.
Part #48-1480
$44.95 CAD Set
Add to Cart

Carb Holders with Air Barbs

Product Photo
38mm. Carb Holder Set for Stock Mikuni BS38CV Carburetors. OEM reference:
447-13555-01-00 LH, 447-13565-01-00 RH.

Same as used on 1970-77 models. Air barbs are for balancing carbs or operation of
original vacuum type petcocks. Some models require spacers.

Fits: 1970-77 650's.

*** Note - these are Not good replacement parts if the intent is to use the stock side covers
Part #48-7479
$62.95 CAD Set
Add to Cart

BS38 Carb Holder Clamp

Product Photo
Carb Holder Band Clamp - 56-61 mm. Range.

Fits Carb Holders for Stock Mikuni BS 38 CV Carbs as Used on North American
1970-79 XS/TX650's.
Part #15-0673
$4.50 CAD Ea
Add to Cart

Carb Holder Set

Product Photo
Carb Holder Set Fits: Stock Mikuni BS34 CV Carbs on XS650G/H/SG/SH/SJ/SK
1980-1984 + Mikuni aftermarket VM-34/36 & 38mm roundslide carbs.

Kit Includes 1pc. Each of Carb Holders OEM # 3G1-13586 & OEM # 3G1-13596
plus the 2 Fiber Washers.
Part #20-6038
$59.95 CAD Set
Add to Cart

BS34 Carb Holder Clamp

Product Photo
Carb Holder Band Clamp - 49-55 mm. Range.

Fits Carb Holders for Stock Mikuni BS 34 CV Carbs as Used on North American
1980-84 XS650's
Part #15-0672
$4.50 CAD Ea
Add to Cart

Intake Spiggot Gasket (Pk/2)

Product Photo
Intake Spiggot Gasket (Carb Holder Rubber) (Pk/2), OEM Ref.# 256-13556-01.

Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between
the XS manifolds and the carb holders for the PWK 32.

Fits: 1970-84 650's Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650.

Note: 2 sets required.
Part #18-0865
$8.50 CAD Pk/2
Add to Cart

Carb Holder Stainless Steel Screw Set

Product Photo
Stainless Steel Socket Head Screws for Carb Holders Set/4.

Fits: Stock carb holders as used on 1970-84 650's
Part #49-0741
$4.95 CAD Set
Add to Cart

Blind Plug

Product Photo
Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00.

Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum
petcocks are replaced with manual type petcocks. Order quantity needed.

Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm
XS Performance Carb Set for XS650.

Note: Each carb holder requires 1 Blind Plug.
Part #48-1447
$1.95 CAD Ea
Add to Cart

XS650 Billet Aluminum Intake Manifolds TC Bros Choppers

Product Photo
TC Bros XS650 Billet Aluminum Intake Manifolds.

Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes.

These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intakes are not designed to support your carbs without your stock airboxes installed causing them to crack over time. These aluminum intakes are much stronger and will not crack. Kit includes stainless steel hoseclamps that will never rust. These will fit aftermarket 34-36mm Mikuni VM Roundslide Carbs.

Will NOT fit stock 34mm CV, stock 38mm, or Mikuni 38mm VM Roundslide Carbs.

Sold as a package (Picture shown)
Part #19-0460
$99.95 CAD Pk
Add to Cart

Carb Holder Set - PWK 32

Product Photo
Carb Holder Set (2) for XS Performance Keihin PWK Flatslide Carb Kit.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650.

Note: Made with Ethanol resistant material.
Part #48-9035
$54.95 CAD Set/2
Add to Cart

Precision Carb Sync Gauges

Product Photo
Dual Carb Sync Gauge Set with Built in Adjustable Pulse Dampers Mounted
on Bracket and with Hoses. Precision Diaphragm type gauge set originally
designed for Professional Motorcycle shop use in Japan.

Note: Sync gauges hoses hook up to carb holder vacuum air barbs
(not included). Your bike must have these air barbs in order to use
this sync tool.
Part #35-1388
$79.95 CAD Set
Add to Cart

Band Clamp

Product Photo
Band Clamp - 39-43mm. Range. Can be used for Carb Holders, Air Boxes,
Fork Gaitors, Filters etc. Requiring this Size.

Note: See top of this sections for other sizes and clamps specific to
stock carb holders.
Part #15-0684
$4.50 CAD Pc
Add to Cart

Band Clamp

Product Photo
Band Clamp - 45-49mm. Range. Can be used for Carb Holders, Air Boxes,
Fork Gaitors, Filters etc. Requiring this Size.

Note: See top of this section for other sizes and clamps specific to
stock carb holders.
Part #15-0685
$4.50 CAD Pc
Add to Cart

Band Clamp

Product Photo
Band clamp - 63-67mm. Range. Can be used for Carb Holders, Air Boxes,
Fork Gaitors, Filters etc. Requiring this Size.

Note: See top of this section for other sizes and clamps specific to
stock carb holders.
Part #15-0686
$4.50 CAD Pc
Add to Cart

Band Clamp

Product Photo
Band Clamp - 68-73mm. Range. Can be used for Carb Holders, Air Boxes,
Fork Gaitors, Filters etc. Requiring this Size.

Note: See top of this section for other sizes and clamps specific to
stock carb holders.
Part #15-0687
$4.50 CAD Pc
Add to Cart

Rubber Joint

Product Photo
Rubber Joint - Carb to Air Filter Box - 1Pc. of Air Box Rubber Joint & 2pc. of
Tension Spring.

Fits: 1970-84 XS/TX 650's - Carb to air box - right or left side.

Each bike requires 2 sets.
Part #15-0671
$14.95 CAD Set
Add to Cart

Rubber Joint Set

Product Photo
Rubber Joint (Between Air Filter Boxes) and Spring.

Fits: Stock Air boxes used on 1974-84 650's.
Part #15-0674
$16.95 CAD Set
Add to Cart

Engine Breather Hose & Spring

Product Photo
Engine Breather Hose & Spring - Black Vent Hose & 10" Spring
Part #15-0675
$6.95 CAD Set
Add to Cart

Breather Vent Hose

Product Photo
Breather Vent Hose - 1 Meter (Approx. 3 Feet) Bulk Length.
Part #15-0678
$8.50 CAD Metre
Add to Cart

Black Rubber Fuel Line

Product Photo
Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" (4.5mm) ID
- 11.5" Long.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).
Part #20-4009
$2.75 CAD Pc
Add to Cart

Black Rubber Fuel Line

Product Photo
Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm) - 11.5" Length.
Part #20-4010
$2.75 CAD Pc
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring Type Hose Clamp. 3/16" (4mm) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for small carb vent hose.
Part #20-4012
$3.95 CAD Pk/10
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching small fuel or vent hose.
Part #20-4014
$3.95 CAD Pk/10
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.
Part #20-4016
$3.95 CAD Pk/10
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring Type Hose Clamps 0.35" (9mm) inside Diameter size (unexpanded)
in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10
black rubber fuel line.
Part #20-4017
$3.95 CAD Pk/10
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring type Hose Clamp. 3/8" (10mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.
Part #20-4018
$3.95 CAD Pk/10
Add to Cart

Wire Hose Clamps

Product Photo
Wire Spring type Hose Clamp. 1/2" (13mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.
Part #20-4020
$3.95 CAD Pk/10
Add to Cart

Fuel Hose Quick Disconnect

Product Photo
Fuel Hose Quick Disconnect- 1/4" or 6mm. Fuel line cut off for a quick and easy way
to cut off fuel supply while working on your bike.
Part #20-0009
$9.95 CAD Ea
Add to Cart

Fuel Line T

Product Photo
Fuel Line T - Ideal for Linking Output from Two Fuel Petcocks into One.

Fits: 1/4" - 5/16" ID fuel line.
Part #20-0007
$3.95 CAD Pc
Add to Cart

Aluminum Fuel Pipe Tee

Product Photo
Aluminum Carb Fuel Line T-Piece & Rubber O-rings (4) - (Fuel supply T pipe
that fits between carbs).

Replaces plastic coated pot metal stock fuel tee that fits between stock Mikuni
BS 34mm CV carbs used on North American Market 1980-84 XS650's.

Fits: XS650 80-84 34mm CV carbs - 9mm (Approximately 3/8")

Note: Carbs will have to be detached from each other to install and we suggest
you replace the link bar screws that join the 2 carbs together as the originals are
usually difficult to remove without.
Part #200-1018
$18.95 CAD Ea
Add to Cart

Clear Square Inline Fuel Filter.

Product Photo
Clear Square Inline Fuel Filter.
Part #20-0013
$3.50 CAD Ea
Add to Cart

Reed Type PVC Valve

Product Photo
XS Performance
Reed Type Positive Crankcase Ventilation Valve.

Valve hooks to engine top breather vent and allows expelled air out but reed
prevents air re-entering quickly so a very small vacuum is created in the
crankcase. A small power increase has been noted during dyno tests (most
notable on pre 1977 engines) and the crankcase vacuum helps prevent crankcase
pressure from pushing oil past oil seals and case joints.
Part #15-0677
$26.95 CAD Ea
Add to Cart

Chrome Breather Filter with Mount

Product Photo
Chrome Breather Filter with Diecast Mount Bracket and Filter Cap.
Part #15-0680
$23.95 CAD Ea
Add to Cart

Chrome Breather Filter

Product Photo
Breather Filter with Chrome Steel Ends.
Part #15-0682
$19.95 CAD Ea
Add to Cart

Breather Filter

Product Photo
Breather Filter with Rubber End.
Part #15-0681
$14.95 CAD Ea
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 37-43mm. (1.45"-1.69") Diameters
Part #15-0690
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 43-49mm. (1.69"-1.93"") Diameters
Part #15-0691
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 49-67mm. (1.93"-2.64") Diameters
Part #15-0692
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 67-73mm. (2.64"-2.87")Diameters
Part #15-0693
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 73-79mm. (2.87"-3.11") Diameters
Part #15-0694
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 79-85mm. (3.11"-3.35") Diameters
Part #15-0695
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 85-91mm. (3.35"-3.58") Diameters
Part #15-0696
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 91-97mm (3.58"-3.82") Diameters
Part #15-0697
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 97-103mm (3.82"-4.00") Diameters
Part #15-0698
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 103-109mm (4.00"-4.29") Diameters
Part #15-0699
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 109-115mm (4.29"-4.53") Diameters
Part #15-0700
$4.50 CAD Ea.
Add to Cart

Band Clamp

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 115-121mm. (4.53"-4.76") Diameters
Part #15-0701
$4.50 CAD Ea.
Add to Cart

Band Clamp - 127mm

Product Photo
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 121-127mm. (4.76"-5.00") Diameters
Part #15-0702
$4.50 CAD Ea.
Add to Cart

XS Performance Pod Filter

Product Photo
XS Performance
52mm. XS Performance Pod Filter.

Pod fits to velocity stack on Dellorto PHF36 carbs (this combination has been
shown on Dyno tests to give the most power).

Pod filter is a New XS Performance item and is an improved replica
(Dyno developed) of the most popular brand on the market. Chrome end cap,
internal moulded stack and no step rubber mount.

Pod filter is supplied dry but cotton gauze filtration material may be oiled for
improved dust filtration.

Fits: 1970-79 stock Mikuni BS38 CV Carbs + some Mikuni TM aftermarket carbs.
+ Fits our XS#48-7000 Carb Kit.
Part #15-0036
$23.95 CAD Ea
Add to Cart

54mm. XS Performance Pod Filters

Product Photo
XS Performance
54mm. XS Performance Pod Filter - Tapered Oval Style with Chrome End Cap.

Pod is an improved replica (Dyno & flow bench developed) of the most popular
brand on the market. Features molded in internal stack, no step rubber mount
flange and Chrome end cap.

Filter is supplied dry but washable filtration material may be oiled for improved
dust filtration. Filter body is 71mm. (2.8") deep x 74mm. (2.91") wide x 101mm.
(4") high (at base).

Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs.
+ Fits Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650

Note: Each kit requires 2 filters.
Part #15-0035
$23.95 CAD Ea
Add to Cart

57mm. XS Performance Pod Filter

Product Photo
XS Performance
57mm. (2 1/4") XS Performance Pod Filter - Tapered Oval Style w Chrome End Cap.

Pod is an improved replica (dyno and flow bench developed) of the most popular
brand on the market. Features - Molded in internal velocity stack. No step rubber
mount flange and chrome end cap.

Filter is supplied dry but washable filtration element may be oiled for enhanced
dust filtration. Filter body is 2 3/4" Deep x 3 3/4" Wide x 4 1/2" High (at base).

Fits: Mikuni VM34 aftermarket roundslide carbs.

Note: Always measure the external diameter of the carb mouth to confirm size
needed. Most pods easily fit plus or minus 1/16" from size indicated.
Part #15-0027
$23.95 CAD Ea
Add to Cart

62mm. XS Performance Pod Filter

Product Photo
62mm. (2.45") XS Performance Pod Filter - Tapered Oval Style w Chrome End Cap.

Pod is an improved replica (dyno and flow bench developed) of the most popular
brand on the market. Features - Molded in internal velocity stack. No step rubber
mount flange and chrome end cap.

Filter is supplied dry but washable filtration element may be oiled for enhanced
dust filtration. Filter body is 2 3/4" Deep x 3 3/4" Wide x 4 1/2" High (at base).

Fits: Mikuni VM36 aftermarket roundslide carbs + some large Keihin carbs.

Note: Always measure the external diameter of the carb mouth to confirm size
needed. Most pods easily fit plus or minus 1/16" from size indicated.
Part #15-0029
$23.95 CAD Ea
Add to Cart

64mm. XS Performance Pod Filter

Product Photo
XS Performance
64mm. (2 1/2") XS Performance Pod Filter - Tapered Oval Style w Chrome End Cap.

Pod is an improved replica (dyno and flow bench developed) of the most popular
brand on the market. Features - Molded in internal velocity stack. No step rubber
mount flange and chrome end cap.

Filter is supplied dry but washable filtration element may be oiled for enhanced
dust filtration. Filter body is 2 3/4" deep x 3 3/4" Wide x 4 1/2" High (at base).

Fits: Some Large Mikuni & Keihin Flatslide & Round slide aftermarket carbs.

Note: Always measure the external diameter of the carb mouth to confirm size
needed. Most pods easily fit plus or minus 1/16" from size indicated.
Part #15-0044
$23.95 CAD Ea
Add to Cart

Air Filter

Product Photo
Air Filter - OEM Ref.# 256-14451 - Made in Japan.

Fits: XS1/XS1b 1970-71

2 used per bike
Part #15-0651
$21.95 CAD Ea
Add to Cart

Air Filter

Product Photo
Air Filter - OEM Ref.# 306-14451 - Made in Japan.

Fits: XS2/TX650 1972-73

2 used per bike
Part #15-0652
$27.95 CAD Ea
Add to Cart

Air Filter

Product Photo
Air Filter - OEM Ref.# 447-14451-01 - Made in Japan.

Fits: TX650A 1974, XS650B 1975

2 used per bike
Part #15-0654
$39.95 CAD Ea
Add to Cart

Air Filter

Product Photo
Air Filter - OEM Ref.# 533-14451-00 - Made in Japan.

Fits: XS650C/D/E/SE/F/SF/2F 1976-79

2 used per bike.
Part #15-0653
$39.95 CAD Ea
Add to Cart

Air Filter Retainer Clip

Product Photo
Air Filter Element Retainer Clip. OEM Ref.# 533-14468-02-00.

Fits: XS650 C/D/E/F/2F/SE/SF 1976-79
Part #99-5006
$6.50 CAD Ea
Add to Cart

Air Filter

Product Photo
Air Filter - OEM Ref.# 3G1-14451 - Made in Japan.

Fits: XS650G-K - All 1980-84 650's

2 used per bike.
Part #15-0655
$39.95 CAD Ea
Add to Cart

Air Filter Retaining Clip

Product Photo
Air Filter Retaining Clip - OEM Ref.# 3G1-14468-00.

Fits: XS650 1980-84 with stock 3G1 type air filters.
Part #99-5005
$5.95 CAD Ea
Add to Cart

K&N Universal Clamp on Air Filter

Product Photo
Genuine K&N Universal Clamp on Air Filter for Mikuni and Keihin Motorcycle Carburetors.

Mounting flange inside dimension 2 1/4", filter outside diameter 3.5", 5" long, flange length 5/8", 5 degree angled flange.

Works with Mikuni and Keihin carbs sold on our site. DOES NOT work with the XS Performance carb kit 48-9010. DOES work with 48-8100.
Part #15-0510
$59.95 CAD Ea
Add to Cart