XS650 Direct

Brass Caliper Spacers (Pair) - A Replacement Set
Used to space calipers when installing upgraded front brake discs (XS# 30-3065)
2 pc. used per caliper ( Note: Now Included with XS#30-3065 brake discs ).

Fits: 77-84 XS650 Calipers when our performance discs #30-3065 are installed.

Thread Pitch Gauge for measuring Metric thread pitch (threads per millimeter).
A very useful tool to identify the many various fastener threads used on
Japanese bikes. Gauge has the following sizes - 0.5, 0.6, 0.7, 0.8, 0.9, 1.0,
1.25, 1.75, 2.7, 2.8.

Stainless Steel carb link bar Screws - Set of 4 with socket (Allen) heads.

Link bar screws hold carbs together (on the carb support brackets) and often
need replacing when changing the fuel line T on stock 80-84 BS34 CV carbs.

Chrome Custom handlebar bar top Clamp - with plated allen socket bolts.
Fits: All 650's 1970-84

Steering Head Bolt with domed head and matching chrome radiused Washer.
Fits: All 650's with a steering head post Bolt (not models with a damper).
Improved appearance over stock style.

Engine Top Fastener Set - 56pc. - Fits: 1972-84 XS/TX 650's

56pc. Kit Contains: 4 Hole Tappet Cover chromed Crown Nuts (4pc.) with
matching chrome Washers (4pc.) + Cylinder Head chrome Crown Nut (8pc.)
+ Chrome rocker shaft End Plug (4pc.) + 3 Hole Tappet Cover chromed Crown
Nuts (9pc.) with matching chrome Washers (9pc.) + Point/Cam Cover chrome
Screws (4pc.) + Exhaust Stud chrome Crown Nuts (4pc.) with matching
Stainless Lock Washers (4pc.), + 2pc. Chrome Oil tube banjo bolts, + 2pc.
Chromed cylinder front/Cam chain guide bar Nuts, + 2pc. chromed cam chain
guide bar bolts.

Engine Top Fastener Set - 55pc. - Fits: 1970-71 650's

55pc. Kit Contains: 3 Hole Tappet Cover chromed Crown Nuts (12pc.) with
matching chrome Washers (12pc.) + Cylinder Head chrome Crown Nut (8pc.)
+ chrome rocker shaft End Plug (4pc.) + Point/Cam Cover chrome Screws (4pc.)
+ Exhaust Stud chrome Crown Nuts (4pc.) with matching Stainless Lock
Washers (4pc.) + 2pc. Chrome Oil tube banjo bolts, + 2pc. Chromed Cylinder
front/Cam chain guide bar Nuts, + 2pc. chromed cam chain guide bar bolts.

Cylinder Head Bolt Set - 3pc. Bolt Set with chrome Domed Heads .
1pc. 6mm. bolt (center at rear of cylinder head) + 2pc. of Head Bolts (2 outer
bolts located under each spark plug). Fits: All 650's 1970-84.

Engine Crankcase Bolts (Set4). Bolts fasten engine cases together and pass thru
cases from the top of the rear portion of the engine. We have replicated the
early type attractive Chrome plated Domed head type Bolts and have the 3 sizes
in a set of 4. Set Fits: All 650's 1970-84.

Tall Chrome Crown Nut Set (6pc. used on bottom of crankcase).
8mm. x 1.25 thread x 19mm. tall (use 12mm. wrench).
Replaces OEM# 90176-08019

Lower Engine Case Screw Set. - 18pc. - Fits: Lower right hand & left hand
engine cases on all 650's.

Stainless steel Crown Nuts for All 650 Cylinder Heads 1970-84. Sold Each

Brass Cylinder Head Washers - Can replace all cylinder head sealing washers or
all Head Nut Washers used on any 650. 22mm. OD x 10.5mm. ID x 4mm. Thick

Exhaust Stud Nuts & Locks - 8 pc. set
Correct type Chrome Steel Crown Nuts and matching stainless steel lockwash

Bolt - Fastens stock XS650 headpipe lower flange to frame.
10mm. x M1.25 x 20mm. with 17mm. hex head

Exhaust Studs for Cylinder Head - 10mm. x M1.25 x 43mm. Long with plated finish.
Fits All 650's 1970-84

Polished Chrome Shock Crown Nut - Short Type
17mm hex x 10mm 1.25pitch x 16mm Long
Fits: All Footrest mount bars 70-84 + Fender mount thru point on 76-78's.

Chrome Thick Washer - 10mm. x 27mm. x 4.5mm. - Fits: All Footrest mount
bars on 1970-84 650's and shock absorber top mount stud on 1974-79 650's.

Chrome Shock Crown Nut - Deep Type
17mm hex x 10mm x 1.25pitch x 21mm Long
Fits: Shock absorber upper studs on 74-84 650's

Passenger peg Mount Nut - Polished Chrome Crown Nut - 12mm. (19 x 19)
Special fine thread to fit passenger footrest mount studs on 1977-84 650's.

Passenger peg Mount Nut - Locking type Nut - 12mm. (19 x 11)
Special fine thread to fit passenger footrest mount studs on 1977-84 650's.

Bolt Set(4) with Lockwashers(4) to mount the front fender to the front forks.
Fits: 78-84 "Special" model front fenders.

Special Fine thread metric Bolt that passes thru Passenger pegs, thru frame and
into muffler mountings (pk./2 bolts with lock washers) of stock OEM mufflers.
Fits: XS1, XS1b, XS2, TX650 (1970-73).

Stainless Steel Lock Washers - 10mm - Pack/10

Stainless Steel Lock Washers - 8mm - Pack/10

Stainless Steel Lock Washers - 6mm - Pack/10

Stainless Steel Lock Washers - 5mm. - Pack/10

Stainless Steel Flat Washers - 10mm - Pack/10

Stainless Steel Flat Washers - 8mm - Pack/10

Stainless Steel Flat Washers - 6mm - Pack/10

Stainless Steel Flat Washers - 5mm. - Pack/10

Clutch Hub Nut. Fits: All 650's 1970-84
Oem Ref.# 90170-18221/18089, 156-16174-00

Alternator rotor nut and lockwasher set

Front Sprocket Nut. Fits: All 650's 1970-84

Polished Chrome Crown Nuts (Pk./10) - 5mm. x M0.8 thread.
5mm. Crown Nuts fit to rear of late model 650 stock tach & speedo's.

Polished Chrome Crown Nuts (Pk./10) - 6mm. x M1.00 thread.

Polished Chrome Crown Nuts (pk./10) - 8mm. x M1.25 thread.

Polished Chrome Crown Nuts (pk./10)
Short type - 10mm. x M1.25 thread x 16mm. high (17mm. hex)

Chrome Crown Nuts (pk./10)
Long type - 10mm. x M1.25 thread x 21mm. high (17mm. hex)

Note: Not for use as Head Nuts.

Cylinder Head Stud for 4 hole Tappet Cover - 8mm. x M1.25 x 30mm. with plated
finish. Fits Cylinder Head 4 hole Tappet covers on all 1972-84 650's.

Cylinder Head Stud for 3 hole Tappet Cover - 6mm. x M1.0 x 30mm. with plated
finish. Fits Cylinder Head 3 hole Tappet covers on all 1970-84 650's.

Oil delivery tube Banjo Bolt - attaches delivery pipe to cylinder head. - Chrome
Plated. Fits: All 1970-84 650's - Sold as a Set of 2 only.

Bolt - Special Bolt that holds the Tach Drive into the Clutch (RH Engine) Case.
Fits: All 650's 1970-84

Bolt XS1/2 Muffler to Late Frame. 12 x 1.25 x 30mm thread length, 19mm head.