XS650 Direct

2-1 Chrome XS Performance Headpipe Set with collector.
1 1/2" OD Headpipes with Finned Headclamps and a collector pipe
(45.3mm.OD)with a slight kick up.
Note: Muffler NOT Included.

In Dyno Development this system with a free flowing muffler
added and unprecedented 10HP+ rear wheel to a completely stock 1980 XS650.

Designed to work with our taper Tip #07-0041 muffler or our
#07-0114 short megaphone or any free flowing muffler that will fit
onto the 45.3mm (1.783") OD collector. This system produces more
power than any other we have tested or developed.

Dyno Test Sheet

Plastic Side Cover Set/2 - Black Finish
Fits: 1980-84 XS650 "Specials" with stock plastic sidecovers.
Sold in Sets Only! Emblems available separate. Each sidecover Set includes
new mounting rubbers. Our sidecovers are exact in shape to originals but come
undrilled so that badge mounting is optional. The rear of the sidecovers are
dimpled in the correct original badge hole locations so that they can be drilled
for badge mount holes if desired.

Sidecover Emblem Set (3G1)- Gold- for 1980
XS650SG but also fits to all 78-81 "Specials"


Note: This set is 2pc. of RH Sidecover badges. These fit to both sidecovers
and the difference (Checkmark) is not usually noticeable unless they are
installed on old paint.

Sidecover Emblem Set (4M4) - Gold - for 1981
XS650SH but also fits to all 78-81 "Specials"

Sidestand Kit - 4 pc. kit - Sidestand, Return Spring and mounting Bolt & Nut
Fits: 1970-73 XS/TX650's Only.
Note: Kit for 74-76 not yet available.

Plastic Side Cover Set/2 - Chrome Finish
Fits: 1980-84 XS650 "Specials" with stock plastic sidecovers.
Sold in Sets Only! Emblems available separate. Each sidecover Set includes
new mounting rubbers. Our sidecovers are exact in shape to originals but come
undrilled so that badge mounting is optional. The rear of the sidecovers are
dimpled in the correct original badge hole locations so that they can be drilled
for badge mount holes if desired.

Seat Assembly - 1980-84 "Special" models - Rear Latching Lift Off Type Only!
Exact Replica of Original - Complete with rear Latching mechanism, base damper
rubbers, Document holder, Steel seat Pan, Original fabric, Attractive 1980
deluxe style pleating.

NOTE: These seats DO NOT fit any other Yamaha models or models of XS650's not
listed above. We do Not have seats for the 78-79 specials (side hinge type).

Document holder - Original type as used on stock 1977-84 XS650 seat bottom.

Gas Shock Absorber Set - (Monza Cafe) for 1974-84 XS/TX650's -Yellow Springs
& Silver body 12.6" (320mm.) eye to eye. Top eye 14.2mm Dia., Bottom eye
10.2mm. Dia. Top Quality

Gas Shock Absorber Set - (Monza Cafe) for 1974-84 XS/TX650's -Black Springs
& Silver body 12.6" (320mm.) eye to eye. Top eye 14.2mm Dia., Bottom eye
10.2mm. Dia. Top Quality

Shock Absorber Set - (Monza Sport) for 1974-84 XS/TX650's -Dual progressive
wound Chrome Springs & Chrome top shroud with Black shock body.
12.75" (324mm.) eye to eye., Includes preload wrench & set of eye rubbers.

Shock Absorber Set - (Monza Sport) for 1974-84 XS/TX650's -Dual Progressive
wound Chrome Springs & Chrome top shroud with Black shock body.
13 3/16" (335mm.) eye to eye., Includes preload wrench & set of eye rubbers.

Shock Absorber Set - (Monza Standard) for 1974-84 XS/TX650's - Chrome Springs
with chrome shock body. 12 3/4" (324mm.) eye to eye. Includes preload wrench
& set of eye rubbers.

Shock Absorber Set - (Monza Standard) for 1974-84 XS/TX650's - Chrome Springs
with chrome shock body. 13 3/16" (335mm.) eye to eye. Includes preload wrench
& set of eye rubbers.

Shock Absorber Set - (Monza Slimline) Fits: XS1/XS1b/XS2/TX650 (1970-73)
Chrome Springs with Black shock body. 12 3/4" (324mm.) eye to eye., 10.2mm.
ID top & bottom.

New super blue high intensity Halogen Bulb. 12V H4 60/55 Watt with P43T
Base. Produces a very pure bright white light. Same style as used in new
street bikes. Replaces Bulb in any of our halogen headlights.

Digital Tire Pressure Guage
LCD Display. 1-100 PSI

Impact Screwdriver with bit set in case. A must have tool used to break loose
engine screws with slot or phillips heads.

Replacement Driver Bit Set (1.5" Long) - Set contains 2 Phillips & 2 Slotted
impact driver Bits.

Replacement Driver Bit Set ( 3" Long ) - Set contains 2 Phillips & 2 Slotted
impact driver Bits.

Speedometer - Chrome Mini - 1.9" Dia. White Face, 0 -140MPH. for Yamaha
650's. Internal illumination.

Tachometer - Chrome Mini - 1.9" Dia. - White Face, 0-12,000 RPM for Yamaha
650's. Internal illumination.
Mechanical (cable drive) type.

Chrome plated alloy mount Bracket for Mini tach & speedos - Handlebar 2 pc.
clamp type mount. 10mm. RH threaded.

High Performance Disc Brake Rotors for 77-84 XS650's
Stainless Steel Disc - Drilled - Fits: Front Right or Left - Less unsprung weight -
Approx 3.6Lbs. verses stock discs at approx 6.2 Lbs. - 298mm.Dia.
Japanese Made Superior Quality Performance Disc Brake Rotors.

Carb Rebuild Kit - Fits: XS650E/SE/F/SF/2F (1978-79). Kit contains: 8 hole choke
body Gasket, Float Bowl Gasket 256, Float Valve Assy. 2.0 with washer, Pilot
Jet #27.5 VM22/210 type, #135 Small Round Main Jet N102/221, Pilot Air Mixture
Screw with O-Ring and spring, Choke plunger and Washer for float bowl main jet
access plug. Note: Slide Needle Not included but available separate.
Made in Japan - 1 kit required per carb.

Beware!
Carb idle mixture screw O-Rings included may or may not fit correctly in your
Mikuni BS38 CV stock carb. The O-Ring in the carb as originally supplied by
Mikuni/Yamaha varies in fit and size and we have found it impossible to match
or guarantee a proper fit. No alternatives can or will be supplied. The mixture
screw and matching O-ring was never sold or supplied by Yamaha or Mikuni.

Heavy Duty Tiedown set - 1 inch Wide x 5 1/2FT. 4000 LB. Strength with
Quick Release. - Set of 2 (Black Color)

Tire Lever - 16" long Dunlop type - For those tough tires needing lots of leverage
to remove. You need 2-3 of these to do the job!

Clutch Holder Tool - Holds inner and outer clutch hubs so that the center nut
may be removed without damaging hubs.

Fits: All 650 clutches (1970-84).

Rivet Type Joiner Link for 530HT Chains. New hollow end Rivet Type.
Use this link for Maximum Chain Strength.
Note: Special Riveting Tool Required.

Valve Guide - Intake - Standard size for 1970-84 XS/TX650's

Valve Guide - Exhaust - Standard size for 1970-84 TX/XS650's

Alternator Housing Mount Screws - Special 6mm. (pk/2) Fits: All 650's.
Screws to mount alternator stator housing to engine.

Oil delivery tube Banjo Bolt - attaches delivery pipe to cylinder head. - Chrome
Plated. Fits: All 1970-84 650's - Sold as a Set of 2 only.

Brake Hose - Upper Front. Original rubber type with protective spring.
Fits: 1977 Standard models and 1978-84 Specials (With non-stock lower bars).
- Made in Japan - DOT Approved

Carb Choke Plunger - Fits: Stock Mikuni BS38 CV Carbs as used on 1972-75
XS2/TX650/TX650A/XS650B 650's.

Carb Choke Plunger - Fits: Stock Mikuni BS34 CV Carbs as used on
1980-84 XS650's.

Gas cap Rubber Seal - Fits: All 1974-75 XS/TX 650 gas caps.
Oem Ref.# 341-24612-01