- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Throttle Sleeve
Throttle Sleeve-Fits: Stock 1970-75 XS/TX650 OEM
Throttle Housing Assembly. Nylon replacement for
cast stock dual pull throttle sleeve.
Replaces OEM #256-26243-00
Throttle Housing Assembly. Nylon replacement for
cast stock dual pull throttle sleeve.
Replaces OEM #256-26243-00
Throttle Sleeve
Throttle Sleeve - Fits: Stock 1976-84 XS650 OEM Throttle Housing Assembly.
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Black
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Chrome Plated
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Black
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Chrome Plated
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Horn Button with Spring
Horn Button with Spring - Fits: XS/TX650 switches 1974-84.
Bar Switch Assembly
Bar Switch Assembly - Clutch Side - Black
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Bar Switch Assembly
Bar Switch Assembly - Clutch (LH) Side - Chromed
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Black
Fits: TX650A 1974 and XS650B 1975 models (Dual pull
throttle cable models). Replaces OEM Ref. #447-83963-00
Note: Wires from this switch usually ran thru the
handlebars. Our replica has a U channel in the housing
that allows the wires to run outside of the bars (or
inside).
If the wires from the switch are to be run inside the bars
it will be necessary to remove the end terminal coupler
block and attach suitable end terminals to match your
harness.
Fits: TX650A 1974 and XS650B 1975 models (Dual pull
throttle cable models). Replaces OEM Ref. #447-83963-00
Note: Wires from this switch usually ran thru the
handlebars. Our replica has a U channel in the housing
that allows the wires to run outside of the bars (or
inside).
If the wires from the switch are to be run inside the bars
it will be necessary to remove the end terminal coupler
block and attach suitable end terminals to match your
harness.
Handlebar Switch Housing Screws - Clutch Side
Black Switch housing Screws (Pk./2)
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2058
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2058
Handlebar Switch Housing Screws - Clutch Side
Chrome Switch housing Screws (Pk./2)
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
Handlebar Switch Housing Screws - Brake Side
Black Switch housing Screws (Pk./2)
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2059 & #24-2060
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2059 & #24-2060
Handlebar Switch Housing Screws - Brake Side
Chrome Switch housing Screws (Pk./2)
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's
NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063
Clutch Safe-T Switch
Clutch Safe-T Switch - Fits: XS650s 1980-84 that have this switch mounted on
the clutch lever bracket (clutch must be pulled in to start bike).
the clutch lever bracket (clutch must be pulled in to start bike).