XS650 Direct

Brake Cable (Grey) - Fits: XS1/XS1B (1970-71) Front Drum Brake
OEM # 256-25341-00 Made in Japan

Decompressor Cable (Grey) - Fits: XS2(1972), TX650(1973)
OEM # 306-26371-00-00 Made in Japan

Cable Luber - Yamaha pressure type (Sold each)
Water & dirt are blown down cable by lubricant when pressure spray can nozzle
is applied. Spray lube sold by most bike shops.

Clutch Cable (Grey) - Fits: XS1/XS1B/XS2/TX650 (1970-73)
OEM Ref.# 256-26335-02 Made in Japan

Clutch Cable (Black) - Fits: Yamaha XS/TX650 (1974-84) Standard models and
can also be used on 1978-84 - Specials - with bars that are lower than originals.
Made in Japan

Clutch Cable (Black) - Fits: XS650 (1978-84) "Specials" with stock pullback type
high bars. Made in Japan

Extended Clutch Cable - (Black) Clutch - Same as Clutch cable
#51-3204 but + 350mm. (13.75") in length. Total outer cable
casing length including metal bend that fits to engine is approx
66.5" (1690mm). Cut the outer cable to the desire length, crimp
on the cable casing ferule, slide on the metal bend fitting
(engine end), trim the inner cable to length and then solder on
the clutch push screw cable end nipple (Ferule, fitting and
cable end included in pack).

Fits: Custom High Bar applications for TX/XS650's (1974-84).

Note: Soldering required and length difference between inner
and outer cables must be kept same as stock cables.

Clutch Cable End (at Lever) - 8mm. Dia. x 9mm. long - Pk./10
Cable ends for making or repairing cables.

Fits: Cable XS #51-3204/51-6500/51-6502 + XS Decompressor
cable XS #51-6504 at both ends.

Clutch Cable End (lower end at push screw) - Pk./10
Cable ends for making or repairing cables.

Fits: Cable XS #51-3204/51-6500/51-6502 + XS1 Brake Cable
at Lower (Drum) End.

7mm ID Cable Ferrule - (Outer cable end cover) - Pk./10
Ferrule Cable ends for making or repairing cables.

Fits: Clutch Cables XS #51-6500/51-6502/51-3204 +
Brake Cable XS #51-6501.

Cable Adjuster - Fits: All 650 Clutch cables - 8 x 23mm. - Gold Anodized

Clutch Cable Adjuster Dust Cover - Rubber boot/cover
keeps dirt from contaminating cable adjuster threads.
Replaces original OEM cover.

Fits: 78-84 XS650's and hundreds of other Yamaha's.

Brake Lever/Front Master Cylinder Dust Cover - OEM Ref. #1T5-26372-00

Fits: Lever at Front Master Cylinder on
Yamaha XS6502E/F/2F/G/H/J/K/SE/SF/SG/SH/SJ/SL/LK/SK (1978-84)

Clutch Lever dust cover - OEM Ref. # 1E6-26372-00

Fits: Clutch Lever on
Yamaha XS6502E/F/2F/G/H/J/K/SE/SF/SG/SH/SJ/SL/LK/SK (1978-84)

Lever Bolt - Clutch bracket - Replacement bolt for 09-6580/81/83/84 and most
earlier lever brackets.

Lever Bracket - Clutch side, as used on most 1974-80 models. Has threaded mirror
hole and includes adjuster and lever bolt. (No safe T switch hole).
OEM Ref.# 498/341-82911

Lever Bracket - Clutch Side, Late Model 650 Yamaha type with Safe-T switch
hole and threaded mirror hole. Includes adjuster and lever bolt . Used on most
81-84 650's Oem Ref.# 4KO/3Y6-82911-00

Clutch Safe-T Switch - Fits: XS650s 1980-84 that have this switch mounted on
the clutch lever bracket (clutch must be pulled in to start bike).

2 pc. Lever Bracket - Clutch side - Fits: most 81-84 650's . With Safe-T switch hole.
Much stronger and can be changed without removing grip.

2 pc. Lever Bracket - Clutch side - Fits: most 72-84 650's .No Safe-T switch hole.