- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Rear Master Cylinder for 78-80
OEM Type Rear Master Cylinder Assembly for 1978-80 XS 650 "Specials"
with rear disc brake. Includes plunger rod.
with rear disc brake. Includes plunger rod.
Reservoir Assembly
Replacement Rear Master Cylinder Reservoir Assembly
with hose (OEM Type). Direct fit to Master Cylinder
Assembly 08-4008.
Fits: XS650 SE/SF/SG 1978-80
with hose (OEM Type). Direct fit to Master Cylinder
Assembly 08-4008.
Fits: XS650 SE/SF/SG 1978-80
Racing/Custom Rear Master Cylinder
Rear Master Cylinder assembly with reservoir for Custom or Race Bikes
Belcrank type action to operate (belcrank lever is slotted with 10mm. hole).
12.7mm. piston bore. 8mm. Mount holes @ 40mm. center to center.
Reservoir inlet rotates 360 degrees for mounting in any direction.
Includes 10mm. x 1.25 outlet Banjo Bolt
Belcrank type action to operate (belcrank lever is slotted with 10mm. hole).
12.7mm. piston bore. 8mm. Mount holes @ 40mm. center to center.
Reservoir inlet rotates 360 degrees for mounting in any direction.
Includes 10mm. x 1.25 outlet Banjo Bolt
Racing/Custom Rear Master Cylinder
Rear Master Cylinder assembly with reservoir for Custom or Race Bikes
Belcrank type action to operate (belcrank lever is slotted with 8mm. hole).
12.7mm. piston bore. 6mm. threaded Mount holes @ 45mm. center to center.
Reservoir inlet rotates 340 degrees. Includes 10mm. x 1.25 outlet Banjo Bolt
Belcrank type action to operate (belcrank lever is slotted with 8mm. hole).
12.7mm. piston bore. 6mm. threaded Mount holes @ 45mm. center to center.
Reservoir inlet rotates 340 degrees. Includes 10mm. x 1.25 outlet Banjo Bolt
Racing/Custom Rear Master Cylinder
Rear Master Cylinder assembly with reservoir for Custom or Race Bikes
Mount holes 40mm. center to center. 12.7mm. plunger bore.
Reservoir inlet rotates 360 degrees for mounting in any direction.
8mm. threaded plunger stud
Note: must push straight in.
Includes 10mm. x 1.00 outlet Banjo Bolt
Mount holes 40mm. center to center. 12.7mm. plunger bore.
Reservoir inlet rotates 360 degrees for mounting in any direction.
8mm. threaded plunger stud
Note: must push straight in.
Includes 10mm. x 1.00 outlet Banjo Bolt
Banjo Bolt
Banjo Bolt - M10 x 1.0 for use on Magura master cylinder only.
Banjo Bolt
Banjo Bolt - M10. x 1.25 - Fits: All original XS/TX650 front & rear master cylinders
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
Banjo Bolt Washers
Banjo Bolt Washers - 10mm. (Pk./2) Fits: All Brake hoses & Banjo Bolts.
Hydraulic Banjo Bolt Brake Switch
Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.25 with 24" Lead.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Hydraulic Banjo Bolt Brake Switch
Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.00 with 24" Lead.
Fits: All Magura Master Cylinders, Our # 08-4000 rear master cylinder and many
European and Suzuki brake systems (10mm. X M1.00 thread). Must use a single
hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Fits: All Magura Master Cylinders, Our # 08-4000 rear master cylinder and many
European and Suzuki brake systems (10mm. X M1.00 thread). Must use a single
hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.