- Gas Tanks, Gas Caps, Petcocks, Parts
- BS34/38 CV Mikuni Carb Floats, Float Valves, Choke Parts
- Mikuni AfterMarket VM Roundslide Carb Parts
- BS34/38 CV Mikuni Carb Slides, Carb Top Parts, Throttle Butterfly Parts
- Carb Rebuild Kits, Gaskets
- Mikuni BS34/38 CV Carb Slide Needles, Needle Jets, Mixture Screws
- Carb Main Jets
- Carb Pilot Jets
- Carb Holders, Air Filters, Fuel Filters, Breather Vent Parts
- Throttle Cables, Throttle Sleeve
- KEIHIN XS PWK Performance Carbs and Parts
- Dellorto Performance Carbs & Parts
Carb Slides should be replaced if the
the diaphragms are torn or if the
slide body rotates from the diaphragm
(is loosened).
Notes: Carb slides for 1978-79 XS650's
are Not interchangeable with
other slides as the needle retainer
differs. 1978-79 Slides are
currently No longer available.
the diaphragms are torn or if the
slide body rotates from the diaphragm
(is loosened).
Notes: Carb slides for 1978-79 XS650's
are Not interchangeable with
other slides as the needle retainer
differs. 1978-79 Slides are
currently No longer available.
Carb Slide & Diaphragm Assembly
Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS38 CV Carbs as used on
1970-77 XS/TX 650's OEM Ref.# 256-14940-00 - Mikuni Genuine
1970-77 XS/TX 650's OEM Ref.# 256-14940-00 - Mikuni Genuine
Carb Slide & Diaphragm Assembly
Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS34 CV Carbs as used
on 1980-84 XS650's OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine
on 1980-84 XS650's OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine
Slide Needle Preload Spring
Spring - Slide needle preload spring for stock BS34 CV Mikuni carbs as used
on 1980-84 North American model XS650's. OEM Ref.# 3F7-14589-00-00
This spring holds the slide needle down in place in the carb slide.
on 1980-84 North American model XS650's. OEM Ref.# 3F7-14589-00-00
This spring holds the slide needle down in place in the carb slide.
Jet Needle Washer
Slide Needle Washer
Washer - Fits under slide needle preload spring and on top of needle & clip on
stock BS34 CV Mikuni carbs as used on 1980-84 North American model XS650's.
Washer - Fits under slide needle preload spring and on top of needle & clip on
stock BS34 CV Mikuni carbs as used on 1980-84 North American model XS650's.
Slide Needle Clip
Carb Slide Needle Clip (pk./2) - Fits: Slide Needles on 1974-84 650's
with stock Mikuni BS34/38 CV Carbs.
with stock Mikuni BS34/38 CV Carbs.
Screws - 5mm.
Screws - 5mm.(no lock washers) Late Mikuni CV carb Lid Screw - Pk./4
Screws - 5mm.
Screws - 5mm.- Early Mikuni BS38 CV carb Lid Screws with lockwashers
and Late 34mm CV Bowl Screw Pk./4
and Late 34mm CV Bowl Screw Pk./4
Throttle Butterfly Shaft Seal
Throttle Butterfly Shaft Seal - Fits: Stock Mikuni BS34/BS38 CV Carbs on all 1970-84 650's
Throttle Shaft Screws
Throttle Butterfly Shaft Screws (Pk./4)
Fits: Stock Mikuni BS34/BS38 CV Carbs.
Fits: Stock Mikuni BS34/BS38 CV Carbs.