- Brake Switches
- Handlebar Switches
- Signal Lamps & Reflectors
- After Market/Custom Tail Lights
- Original Type Tail Lights & Lenses
- Headlamps, Headlamp Brackets, Headlamp Parts
- Ignition: Systems, Coils, Plugs, Switches, Hardware
- Pamco Ignitions and Parts
- Starter System related parts
- Charging System: 1980-84 650 Rotors, Stators, Regulators, Brushes
- Charging System: 1970-79 Rotors, Stators, Regulators, Brushes
- Horns, Miscellaneous electrical parts
- Battery Cables, Batteries, Fuses, Fuse Boxes
- Wire Terminals & Couplers, Wire Harnesses
Circuit Tester
Electric Circuit Tester - Checks all motorcycle primary electrical and computer
circuits for power. Plastic handle lights up if circuit is good. Icepick type
probe and 48" cable with insulated alligator clips.
circuits for power. Plastic handle lights up if circuit is good. Icepick type
probe and 48" cable with insulated alligator clips.
Continuity Tester
Electrical Continuity Tester (use with power off) - Detects open circuit in fuses,
diodes, switches, sockets and wires (requires one AA battery - Not included).
Long 48" leads.
diodes, switches, sockets and wires (requires one AA battery - Not included).
Long 48" leads.
Terminal crimper tool
Terminal crimper tool, fastens metric terminals to wires. Professional Crimps
like factory originals. Also can be used to cut and strip wire.
like factory originals. Also can be used to cut and strip wire.
Metric Terminal
Metric Terminal - Round Female type Pin Connector - Pk./10
Metric Terminal
Metric Terminal - Round Male type Pin Connector - Pk./10
Metric Terminal Cover
Metric Terminal Cover - Round type Female Cover - Pk./10
Metric Terminal Cover
Metric Terminal Cover - Round type Male Cover - Pk./10
Metric Terminal
Metric Terminal - Round Double Female type Pin Connector - Pk./10
Metric Terminal Cover
Metric Terminal Cover - Round type Double Female Cover - Pk./10
Metric Terminal
Metric Terminal - Round Triple Female type Pin Connector - Pk./10
Metric Terminal Cover
Metric Terminal Cover - Round type Triple Female Cover - Pk./10
Metric Terminal
Metric Terminal - Flat Male Spade type Terminal - Pk./10
Metric Terminal
Metric Terminal - Flat Female Spade type Terminal - Pk./10
Metric Terminal Cover
Metric Terminal Cover - Flat Female Spade Cover - Pk./10
Metric Terminal
Metric Terminal - Small Flat Male Spade type Terminal - Pk./10
Metric Terminal
Metric Terminal - Small Flat Female Spade type Terminal - Pk./10
Metric Terminal
Metric Terminal - Round Male Small type pin Connector - Pk./10
Metric Terminal
Metric Terminal - Round Female Small type pin Connector - Pk./10
Mini Fuse Holder
Mini Fuse Holder
Shock proof construction.
Takes mini blade type fuses (5-20AMPS)
Shock proof construction.
Takes mini blade type fuses (5-20AMPS)
Fuse Holder with space for spare fuse
Fuse Holder with space for spare fuse( 30mm.) Correct terminals
(both have male ends) to replace fuse holder as used on all 1970-79
"Standard" models.
(both have male ends) to replace fuse holder as used on all 1970-79
"Standard" models.
XS650 Fuse Boxes
XS650 Fuse Boxes located on top of the battery are a part of the original wiring
harness and have Not been available separate. We now offer a copy of this
box as shown plus matching terminal block & terminals + the battery top cover
it attaches to. Cut the old fuse box from your main harness, attach the
connector block provided and plug in the new fuse box. Fits: All "Specials"
1978-84. Includes 25mm fuses.
harness and have Not been available separate. We now offer a copy of this
box as shown plus matching terminal block & terminals + the battery top cover
it attaches to. Cut the old fuse box from your main harness, attach the
connector block provided and plug in the new fuse box. Fits: All "Specials"
1978-84. Includes 25mm fuses.
Coupler Set
Coupler Set with Terminals - 6 space (Small round pin type)
Coupler Set
Coupler Set with Terminals - 2 space (side by side) - Large Flat Spade type
Coupler Set
Coupler Set with Terminals - 2 space (at 90 degrees to each other) - Large Flat Spade type
Coupler Set
Coupler Set with Terminals - 3 space - Large Flat Spade type. Set for stock
factory TCI Ignition trigger wire to stock wire harness (with terminals).
factory TCI Ignition trigger wire to stock wire harness (with terminals).
Coupler Set
Coupler Set with Terminals - 4 space - Large Flat Spade type.
Coupler Set
Coupler Set with Terminals - 6 space (Large Flat Spade type). This coupler set
connects the 1970-84 650 alternator to the stock wiring harness.
connects the 1970-84 650 alternator to the stock wiring harness.
Coupler Set
Coupler Set with Terminals - 8 space (Large Flat Spade type). This coupler set
connects the 1980-84 650 Rectifier/Regulator to the stock wiring harness.
connects the 1980-84 650 Rectifier/Regulator to the stock wiring harness.
Coupler Set
Coupler Set with Terminals - 3 space (Small Flat Spade type).
Coupler Set
Coupler Set with Terminals - 4 space (Small Flat Spade type).
Coupler Set
Coupler Set with Terminals - 6 space (Small Flat Spade type).
Coupler Set
Coupler Set with Terminals - 9 space (Small Flat Spade type).
Note: Choose Carefully, Wire Harnesses are Not returnable.
Harnesses are made from new Yamaha genuine original patterns
and it is important that YOU order the correct model/
year (See our Model ID Chart link on the Homepage) part
number to match your bike. To further verify, check your old
harness by looking for the OEM part number on the white tape strip
located on the old harness (usually near the ignition coil connection area on the main loom).
Harnesses are made from new Yamaha genuine original patterns
and it is important that YOU order the correct model/
year (See our Model ID Chart link on the Homepage) part
number to match your bike. To further verify, check your old
harness by looking for the OEM part number on the white tape strip
located on the old harness (usually near the ignition coil connection area on the main loom).
Main Wiring Harness
Main Wiring Harness - Fits: XS1/XS1B 1970-71 - ( Black covering ).
OEM Ref.# 256-82590-30-00
OEM Ref.# 256-82590-30-00
Main Wiring Harness
Main Wiring Harness - Fits: XS2/TX650 1972-73 - ( Black covering ).
OEM Ref.# 306-82590-30-00
OEM Ref.# 306-82590-30-00
Main Wiring Harness
Main Wiring Harness - Fits: TX650A/XS650B 1974-75.
OEM Ref.# 447-82590-31/33
OEM Ref.# 447-82590-31/33
Main Wiring Harness
Main Wiring Harness - Fits: XS650C 1976
OEM Ref.# 584-82590-60
OEM Ref.# 584-82590-60
Main Wiring Harness
Main Wiring Harness - Fits: XS650D 1977 ( Up to Engine # 704000 ).
OEM Ref.# 1T3-82590-50/60-00
OEM Ref.# 1T3-82590-50/60-00
Main Wiring Harness
Main Wiring Harness - Fits: XS650D 1977 ( Engine # 704000 & Up ).
OEM Ref.# 1T3-82590-51/61-00
OEM Ref.# 1T3-82590-51/61-00
Main Wiring Harness
Main Wiring Harness - Fits: XS650E 1978
OEM Ref.# 2F0-82590-51-00
OEM Ref.# 2F0-82590-51-00
Main Wiring Harness
Main Wiring Harness - Fits: XS650F 1979.
OEM Ref.# 2F0-82590-52-00
OEM Ref.# 2F0-82590-52-00
Main Wiring Harness
Main Wiring Harness - Fits: XS650SE 1978.
OEM Ref.# 2MO-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
OEM Ref.# 2MO-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
Main Wiring Harness
Main Wiring Harness - Fits: XS650 2F/SF 1979.
OEM Ref.# 2MO-82590-51-00
Wire harness includes built in stock type fuse panel assembly.
OEM Ref.# 2MO-82590-51-00
Wire harness includes built in stock type fuse panel assembly.
Main Wiring Harness
Main Wiring Harness - Fits: XS650G 1980 Special II - (TCi Electronic Ignition).
OEM Ref.# 3GO-82590-50
Wire harness includes built in stock type fuse panel assembly.
OEM Ref.# 3GO-82590-50
Wire harness includes built in stock type fuse panel assembly.
Main Wiring Harness
Main Wiring Harness - Fits: XS650SG 1980 - (TCi Electronic Ignition).
OEM Ref.# 3G1-82590-51
Wire harness includes built in stock type fuse panel assembly.
OEM Ref.# 3G1-82590-51
Wire harness includes built in stock type fuse panel assembly.
Main Wiring Harness
Main Wiring Harness - Fits: XS650H 1981 Special II & XS650SH 1981 -
(TCi Electronic Ignition) OEM Ref.# 4M4-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
(TCi Electronic Ignition) OEM Ref.# 4M4-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
Main Wiring Harness
Main Wiring Harness - Fits: XS650SJ/SK/SL 1982-84 - (TCi Electronic Ignition).
OEM Ref.# 5V4-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
OEM Ref.# 5V4-82590-50-00
Wire harness includes built in stock type fuse panel assembly.
Harness Diode
Plugs into original wire harness on 76-77 XS650's.
Fits Harness #'s XS24-6573/74/75 and is adaptable to replace Diodes used on others.
Fits Harness #'s XS24-6573/74/75 and is adaptable to replace Diodes used on others.
Headlamp Plug
Headlamp Plug - 3 prong Socket with wires. Fits: To All 650's
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Black
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Chrome Plated
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
OEM Ref. # 584-83963-00-00
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Black
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Bar Switch Assembly
Bar Switch Assembly - Brake/Throttle Side - Chrome Plated
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
OEM Ref. # 2L0-83975-00-98
Bar Switch Assembly
Bar Switch Assembly - Clutch Side - Black
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Bar Switch Assembly
Bar Switch Assembly - Clutch (LH) Side - Chromed
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.
Fits: 1977-84 North American Model XS650's.
OEM Ref. # 1T3-83973-00
Note: Switch has No choke cable lever mount as used
on some 1983-84 models.