XS650 Direct

XS Performance Keihin Carb Kit for XS650.
32mm Keihin Flatslide PWK Carb Set - Includes: Carbs,
Carb Holder Sets, Gaskets, extra Jets, 2 into 1 Cable,
XS Performance Intake Manifolds and Pod Filters.

These carbs will make your XS start, idle, accelerate
and perform better than any other Japanese carbs.
Our PWK Carbs were Dyno developed by Heiden Tuning and specially
built by Keihin for Mikes XS for use on four strokes.
A superior replacement for the 1980 to 84 stock Mikuni
BS34 Carbs or your worn out BS38's. Kit is designed to be
a drop on installation and jetting should be correct for
most uses (Note: stock air filter box must be removed).
Additional + & - size jets are included with the kit but
probably will not be needed. Cable fits to 1976-84 throttle.

XS Performance Keihin PWK Kit Dyno Chart

#115 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set

#120 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

#125 Hex type Main Jet (Pair) for Keihin XS 32mm PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

Note: #125 is the "Standard size" Main Jet included with the PWK32 XS
Carb Set and is in most cases the required main Jet for the XS650.

#130 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

#135 Hex type Main Jet (Pair) for Keihin XS 32mm PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

#25 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

#30 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set

#35 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK XS Carb Set.

Note: #35 is the "Standard size" Slow (Pilot) Jet included with the
PWK32 XS Carb Set and is in most cases the required slow jet for the
XS650.

#40 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK 32mm. XS Carb Set.

#45 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carbs.

Fits: Keihin Flatslide PWK 32mm XS Carb Set.

Chrome #3.5 Throttle Valve (Slide) for Keihin XS 32mm. PWK Performance Carb.

Fits: Keihin Flatslide PWK 32mm. XS Carb Set.

Throttle Valve (Slide) Needle N427-46 for Keihin 32mm XS Performance Carb.

Fits: Keihin Flatslide PWK 32mm. XS Carb Set

Clip for Jet Needle (Pair)

Fits: Throttle Valve (Slide) Needle N427-46 for Keihin 32mm.
XS Performance Carb.

Float Needle with Clip.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

O-Ring for Float Bowl

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

O-Ring for Float Bowl Drain Plug

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs.

Drain Plug for Float Bowl

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Screw Set (Pk/2) to fasten Float Bowl.
Phillips Head 4mm. x M0.7 x 14mm. long

Fits: Keihin Flatslide PWK 32mm. xs Performance Carb.

Jet Block Main Gasket (O-Ring Assy.)

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Mounting Screws (Pk./2) for Jet Block mounting.
special 4mm. x M0.7 x 10mm. long with T-20 Torx head.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Main Jet Holder for PWK 32.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Carb Float.

Fits: Keihin Flatslide PWK 32mm.XS Performance Carb.

Pin for Carb Float

Fits; Keihin Flatslide PWK 32mm XS Performance Carb.

Gasket for Carb Top (Slide) Cover.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Screws (Pk/2) for carb Top (Slide) Cover.

Fits: Keihin Flatslide PWK 32mm XS Performance Carb.

Slide Spring

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Plastic cable/spring collar - retains/guides throttle spring and cable at Carb
slide.


Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.

Throttle Cable (Black) Fits: 1976-84 Stock Throttle to Mikuni VM 34/36/38mm.
Non CV aftermarket carbs. 2-1 type design, machined steel junction box.
- Quality made in Japan.

Also fits XS Performance Keihin PWK 32 Carb Kit (XS Part # 48-9010)

Replacement 2-1 Throttle cable for XS650 PWK 32mm. XS Performance Carb
Set for XS650

Made In Japan

Billet Aluminum Carb Spacers, 36mm. long (Set/2) 35mm ID
Fits: To any XS650 Head and improves Low end power and
acceleration.

Dyno developed to provide maximum low RPM Torque with
Dellorto PHF 36.

Note: PHF 36 Carbs + Spacers + Pod filters fit to stock
space (head to battery box).

An essential component of the Keihin XS PWK 32 Flatside carb kit.

Fits: To any XS650 Head and improves low end power and acceleration.
Dyno developed to provide maximum low RPM Torque and optimum throttle
response on the XS PWK flatslide carb set.

Gasket (Pk./2.) - Intake Spiggot (Carb Holder Rubber) - Fits: 1970-84 650's
OEM Ref.# 256-13556-01

Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between
the XS manifolds and the carb holders for the PWK 32.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650.
Note: 2 sets required.

Carb Holder Set(2) for XS Performance Keihin PWK Flatslide Carb Kit.


Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650.

Note: Made with Ethanol resistant material.

Long Carb Holder bolts for PWK Manifold thru Carb holder ( pk./4 ).
Stainless Steel socket head type screws.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650.
Kit Requires 2 pks. of 2.

Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00

Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum
petcocks are replaced with manual type petcocks. Order quantity needed.

Fits: All Mikes XS Carb Holders and Carb Holders for Keihin Flatslide
PWK 32mm XS Performance Carb Set for XS650.

Note: Each carb holder requires 1 Blind Plug.

54mm. XS performance Pod Filter - Tapered Oval style with Chrome end cap.
Pod is an improved replica (Dyno & flow bench developed) of the most popular
brand on the market. Features molded in internal stack, no step rubber mount
flange and Chrome end cap. Filter is supplied dry but washable filtration
material may be oiled for improved dust filtration . Filter body is 71mm.
(2.8") deep x 74mm. (2.91") wide x 101mm. (4") high (at base).

Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs.

Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650
Note: Each kit requires 2 filters.

Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x
11.5"

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).