Products - XS650Direct - Yamaha Motorcycle Parts Warehouse

Brake Caliper - Left Side

Product Id: 08-5000

Brake Caliper - Complete Left side Brake Caliper assembly with mounting bolts and mounting bracket as shown (Brake pads not included). Fits to LH side of 1977-84 XS650's for conversion to Dual disc brakes (RH single disc is stock on 77-84 650's). The latest new production of the 1977-84 XS650 type Caliper. Note: These calipers are the same as earlier production except for the shape/appearance of the very top of the caliper and it's top access cap. This improvement does not affect fit or operation in any way.

${displayCurrency('$ 119.95')}

Brake Caliper - Right Side

Product Id: 08-5001

Brake Caliper - Complete Right side Brake Caliper assembly with mounting bolts and mounting bracket as shown (Brake pads not included). Fits to RH (stock single disc side) of 1977-84 XS650's The latest new production of the 1977-84 XS650 type Caliper. Note: These calipers are the same as earlier production except for the shape/appearance of the very top of the caliper and it's top access cap. This improvement does not affect fit or operation in any way.

${displayCurrency('$ 119.95')}

Brake Caliper Set - Left Hand / Right Hand

Product Id: 08-5002

Brake Calipers - Complete Right and Left Front Brake Caliper assemblies with mounting bolts and mounting brackets as shown (Brake pads not included). Convert your XS650 to Dual disc Brakes! The latest new production of the 1977-84 XS650 type Calipers. Note: These calipers are the same as earlier production except for the shape/appearance of the very top of the calipers and it's top access cap. This improvement does not affect fit or operation in any way.

${displayCurrency('$ 229.95')}

Email Me When Available

Brake Caliper Rebuild Kit

Product Id: 29-0016

Brake Caliper Rebuild Kit, Fits Both Front or Rear Caliper. Contains caliper piston seal, dust boot, spring clip and bleed screw rubber cap. OEM Ref.# 1J3-W0047, 1J3-20000-20-00 Fits: 1977-84 XS650 Front or Rear Calipers

${displayCurrency('$ 19.95')}

Rubber Caliper Sleeve Boot

Product Id: 29-0017

Rubber Caliper Sleeve Boot. This boot allows caliper to float on mounting bolt sleeve. Once this rubber age hardens the caliper will not float and it should be replaced or brakes will drag or squeal. Polish the sleeve and install Boot to restore correct caliper float.

${displayCurrency('$ 7.95')}

Brake Caliper Rebuild Kit

Product Id: 29-0019

Brake Caliper Rebuild Kit - This 5pc. Seal kit rebuilds 1 caliper. Fits: XS2/TX650/TX650A/XS650B/C (72-76) calipers.

${displayCurrency('$ 25.95')}

Brake Bleed Screw Rubber Cap

Product Id: 29-0500

Brake Bleed Screw Rubber Cap.

${displayCurrency('$ 1.95')}

Brake Caliper Bleed Screw

Product Id: 29-0502

Caliper Speed Bleed Screw - Built in check valve allows Easier bleeding. Fits: 1972-76 650 calipers.

${displayCurrency('$ 5.95')}

Email Me When Available

Brake Caliper Bleed Screw

Product Id: 29-0503

Brake Caliper Speed Bleed Screw - Built in check valve allows Easier brake bleeding. Fits: 1977-84 650's Front or Rear.

${displayCurrency('$ 6.95')}

Email Me When Available

Brake Caliper Piston

Product Id: 29-0516

Brake Caliper Piston, Replace if pitted or scored or air will seep into the brake system. Fits Front or Rear Length = 41.3mm, Diameter = 38mm.

${displayCurrency('$ 32.95')}

Brake Caliper Piston

Product Id: 29-0518

Brake caliper Piston, Two pistons are used in these early calipers. Caliper pistons should be replaced if pitted or scored or air will seep into the brake system. Fits: Front caliper on XS2/TX650/TX650A/XS650B/C (1972-76).

${displayCurrency('$ 21.95')}

Brake Caliper Mount Bolts - Pack/2

Product Id: 29-0519

Front Brake Caliper Mount Bolts (Pk/2) for one caliper. Chrome Plated and each with flat and lock washers. Fits: 1977-84 XS650 Front Calipers.

${displayCurrency('$ 4.95')}

Front Brake Caliper Hose Manifold

Product Id: 29-7008

Front Brake Hose Manifold for Dual Disc Brakes. Original Yamaha type manifold with mounting hardware and Banjo Bolts (2). Lower banjo bolt is the long type for fitting the dual hoses to the calipers. Hose Sealing Washers also included.

${displayCurrency('$ 24.95')}

Brake Caliper - Left Or Right Side

Product Id: 08-6008

Early Type Brake Caliper - Right or left side and mounting in front or behind the fork leg. Brake caliper Piston/Brake Pads and bolt/washer and nuts are included. Fits: 1972-76 models

${displayCurrency('$ 109.95')}

Brake Caliper Shims

Product Id: 08-6007

Shims Set (2) to fit early Brake Calipers - Reduces heat transfer to the caliper and in some cases reduces pad rattles & squeeling. Fits: Early 650's - 1972-76 calipers (mounts at rear of pad).

${displayCurrency('$ 2.95')}